We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
3L 5L 10L Rubber Kneader Mixer and Small Rubber Mixer for lab use
1.The mixing chamber is of drilled structure with quick and better heating/cooling effects.The inner woll is coated with hard chrome for long service life.
2. Build-up welding of hard alloy for the two,three,four ridge top and two sides of the rotor, and the working surfaces are coated with hard chrome, good appearance and abrasive resistance.The cooling/hearting medium can pass through the hollow of the tangent linear type, mesh type and synchronization type rotor.
3. Constant hydraulic pressure seal structure is used for the top of the rotor and seal effect is good with long service time thanks to high pressurelubrication automatic alarm for used up of oil.
4. The upper bolt relieves the pressure automatically to protect the machine and for long service time if the machine works for too long time under over load condition.
5. The working surface of up and down bolts are coated with hard chrome, good appearance and abrasive resistance. The cooling/heating medium can pass inner hollow of down bolt.
6. A rotary oil cylinder is used for discharge door, smooth running and accurate positioning.
7. Use two shafts put-out hard teeth reducer and gear coupling or “+” type universal joint, the transmission is smooth with high efficiency and low noise level and long service life.
We ,HangZhou Create EPT Industry Co., Ltd make high quality rubber machines, from materials to producing, we use the good quality material, complete management system, also excellent aftersale service, we hope to be one reliable factory for you!
- special manufacturer with more than 30 years of experience of exporting ability that has professional producing team and technical support
- Exclusive and unique solution can be provided to our customer by our well-trained andprofessional engineers and staff.
- best after sale—follow the whole producing situation,provide photos of machines loaded into containers, track the operating and using situation of client in case of any problems occur .and we can send our worker to customer’s factory to installation and debugging.
- reasonable price and flexible delievery time
|Total volume of
mixing chamber (L)
|Working volume of
mixing chamber (L)
|Tilting angle (°)||≤140||135||140||140||140||140||140||140||140||140||140|
|Rotational speed of the
rotor (front/rear) r/min
compressed air (MPa)
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.